41
OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES
The tire pressure warning system can be selected on “ ” of the Multi-
Information Display (MID).
System reset initialization
(1) Press “ ” switches and select “ ” from the Multi-Information Display (MID).
(2) Press “
” switches and select “Vehicle Settings,” then press and hold “ .”
(3) Press “
” switches and select “TPWS” and then press “ .”
(4) Press “
” switches and select “Set Pressure” then press and hold “ ” until
the warning light blinks three times.
The tire pressure detected by the tire pressure warning system can be displayed
on the Multi-Information Display (MID).
If the tire pressure indicator flashes for 1 minute and then remains on, take the
vehicle to your local Toyota dealer.
Refer to the load label on the door jamb or the “Owner’s Manual” for tire inflation
specifications.
NOTE: The warning light may come on due to temperature changes or
changes in tire pressure from natural air leakage. If the system has not been
initialized recently, setting the tire pressures to factory specifications should
turn off the light.
SAFETY & EMERGENCY FEATURES
Tire Pressure Monitoring (warning) System
(TPMS)
To Next Page
Loading...
