29
Blind Spot Monitor (BSM) and Rear Cross
Traffic Alert (RCTA)
Multi-Information
Display
Audio system
screen*
Buzzer*
Outside rear view mirror indicators
The system is designed to use radar sensors to detect vehicles traveling in the
4Runner’s blind spot. If a vehicle is detected, the driver will be alerted via the
outside rear view mirror indicator on the detected side.
While in reverse, when a vehicle approaching from the right or left rear of the
4Runner is detected, the outside rear view mirror indicators will flash. Also, the
RCTA icon for the detected side will be displayed on the audio system screen, and
the RCTA buzzer will sound.
BLIND SPOT MONITOR (BSM)
REAR CROSS TRAFFIC ALERT (RCTA)
SYSTEM ON/OFF
* RCTA only
(1) Press “ ” switches and select “ ” from the Multi-Information Display (MID).
(2) Press “
” switches and select “ ” or “ ” and then press “ .” The setting
screen is displayed.
(3) Press “
” switches and select the “On/Off” setting function and then press
“
” to select the desired setting.
(4) Press “
” to go back to the menu.
The BSM function and the RCTA function are automatically enabled each time the
vehicle is turned on.
Refer to the “Owner’s Manual” for limitations and more details on this system before
attempting to use it.
OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES
To Next Page
Loading...
