39
OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES
SWITCHING TO CONSTANT SPEED (CRUISE) CONTROL MODE
SETTING CONSTANT SPEED (CRUISE) CONTROL
Note: When your vehicle is too close to a vehicle ahead, and sufficient automatic
deceleration via the cruise control is not possible, the display will flash and the
buzzer will sound to alert the driver. An example of this would be if another driver
cuts in front of you while you are following a vehicle. Depress the brake pedal to
ensure an appropriate vehicle-to-vehicle distance.
Press and hold the cruise control main “ON-OFF” switch for at least 1.5 seconds
to turn on constant speed cruise control. If you are already using DRCC, press the
cruise control main “ON-OFF” switch to turn DRCC off before activating constant
speed cruise control.
Note: When the engine is turned off, it will automatically default to DRCC.
(3) Acceleration when there are no longer any preceding vehicles driving
slower than the set speed
The system accelerates until the set speed is reached. The system then
returns to constant speed cruising.
1.5 seconds
ADJUSTING DISTANCE (CONTINUED)
To adjust speed or cancel, see steps (2) and (3) of ADJUSTING SET VEHICLE
SPEED on page 37.
Refer to the Toyota “Owner’s Manual” for additional information on DRCC operation,
settings adjustments, limitations, and precautions before attempting to use it.
To Next Page
Loading...
