17
OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES
1. When the liftgate reaches the desired height, press the rear liftgate close-button
(on the door jam of the liftgate) once. Press and hold the button until the buzzer
sounds (4 times).
2. To reset the height, with the liftgate open and not moving, press and hold the
rear liftgate close-button for approximately 7 seconds until the buzzer sounds 4
times, and continue to hold until it buzzes 2 times again, then let go. Press the
same button to close the liftgate. When you open the liftgate next time, it will
open to the maximum height.
For more details, refer to the “Owner’s Manual”.
Rear door-Power Liftgate (if equipped)
Instrument panel
Power liftgate switch on the back door
Liftgate opener switch (open only)
Lock switch on the back door
Open: Press and hold
Close: Press and hold again
When the back door is closed, all of the doors
will lock simultaneously and operation signals
will indicate that all of the doors have been
locked.
ADJUSTING THE POWER LIFTGATE HEIGHT
OPENING/CLOSING POWER LIFTGATE
Press
Press
Press
Press
To Next Page
Loading...
