22
Daytime Running Light system (DRL)
Automatically turns on under certain conditions to make vehicle more visible to
other drivers. Not for use at night. (The parking brake needs to be released and the
headlight switch must be in the “
” or “ ” position while the vehicle is on.)
Automatic light cut off system (AUTO)
- Headlights are on: The headlights and taillights will turn off automatically 30
seconds after the vehicle is turned from ON to ACC or OFF and
the driver’s door is opened and closed. (If the “
” switch on
the Smart Key remote is pressed after all doors are closed, the
lights will turn off immediately.)
- Only the taillights are on: The taillights will turn off automatically if the vehicle is
turned from ON to ACC or OFF and the driver’s door is
opened.
Automatic High Beams system (AHB)*
Automatically switches between high and low beams as appropriate to enhance
vision at night.
Refer to Toyota Safety Sense™ 3.0 (TSS 3.0) in this guide or the “Owner’s Manual”
for more details on the Automatic High Beams feature.
* Operating conditions must be met. Refer to the “Owner’s Manual” for details.
Low beam
(Original position)
High beam (Push)
High beam flasher
(Pull)
Lights & turn signals
HEADLIGHTS
Type A Type B
FEATURES & OPERATIONS
Operating the “ ” switch turns on the headlight indicator .
Parking lights ( ) Parking lights ( )
Auto (
) Auto ( )
DRL OFF (
)
Headlights (
) Headlights ( )