45
OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES
ADJUSTING LDA ALERT OPTIONS
TURNING THE DRIVER BREAK SUGGESTION (SWAY WARNING) ON/OFF
(1) Press “ ” or “ ” switches and select “ (4.2-in display)” or “ (7-in
display)” from the Multi-Information Display (MID).
(2) Press “
” or “ ” switches and select “ LDA” or “ Lane Departure Alert
System” and then press and hold “
.” The setting screen is displayed.
(3) Press “
” or “ ” switches and select “Alert Options” and then press “ ”
to change the desired setting. Each time it is pressed, the LDA alert options
changes “Vibration” or “Beep.”
(4) Press “
” to go back to the menu.
(1) Press “
” or “ ” switches and select “ (4.2-in display)” or “ (7-in
display)” from the Multi-Information Display (MID).
(2) Press “
” or “ ” switches and select “ Vehicle Settings” and then press
and hold “
.” The setting screen is displayed.
(3) Press “
” or “ ” switches and select “ Driver Break Suggestion” and then
press “
” to turn the system On/Off.
(4) Press “
” to go back to the menu.
Refer to the Toyota “Owner’s Manual” for additional information on LDA operation,
settings adjustments, limitations, and precautions before attempting to use it.
ADJUSTING LDA ALERT TIMING
(1) Press “ ” or “ ” switches and select “ (4.2-in display)” or “ (7-in
display)” from the Multi-Information Display (MID).
(2) Press “
” or “ ” switches and select “ LDA” or “ Lane Departure Alert
System” and then press and hold “
.” The setting screen is displayed.
(3) Press “
” or “ ” switches and select “Alert Timing” and then press “ ”
to change the desired setting. Each time it is pressed, the LDA alert timing
changes “Default” or “Earlier.”
(4) Press “
” to go back to the menu.
To Next Page
Loading...
