53
OVERVIEWFEATURES & OPERATIONSTOYOTA SAFETY SENSESAFETY & EMERGENCY FEATURES
SYSTEM ON/OFF
(1) Press “ ” or “ ” switches and select “ (4.2-in display)” or “ (7-in
display)” from the Multi-Information Display (MID).
(2) Press “
” or “ ” switches and select “ RSA” and then press “ ” to turn
RSA On/Off.
(3) Press “
” to go back to the menu.
Note: If the vehicle was last turned off while a speed limit sign was displayed
on the Multi-Information Display (MID), the same sign displays again when the
vehicle is turned back ON.
ADDITIONAL RSA SETTINGS
(1) Press “ ” or “ ” switches and select “ (4.2-in display)” or “ (7-in
display)” from the Multi-Information Display (MID).
(2) Press “
” or “ ” switches and select “ RSA” and then press and hold
“
.” The setting screen is displayed.
(3) Press “
” or “ ” switches to select an RSA setting from the menu, and press
“
” to select or change a desired setting.
(4) Press “
” to go back to the menu.
Refer to the Toyota “Owner’s Manual” for additional information on RSA operation,
settings adjustments, limitations, and precautions before attempting to use it.
SUPPORTED TYPES OF ROAD SIGNS (CONTINUED)
Duplicate display example
Depending on the specifications of the vehicle, signs may be displayed overlapping.
To Next Page
Loading...
