Need help?Do you have a question about the Toyota EC-1 Series and is the answer not in the manual?
General| Brand | Toyota |
|---|---|
| Model | EC-1 Series |
| Category | Sewing Machine |
| Language | English |
Connect foot controller and power cord and ensure correct voltage before plugging in.
Procedure for raising the presser foot, removing the old foot holder, and attaching a new presser foot.
Instructions for removing the old needle and inserting a new one, emphasizing proper needle type and sharpness.
Steps to set the needle, open the shuttle cover, and prepare the bobbin case for winding.
How to place the bobbin in the bobbin case and guide the thread through the tension spring and delivery eye.
Testing bobbin tension by shaking the case and adjusting the tension screw.
Step-by-step guide to threading the upper thread through guides, tension disc, take-up lever, and needle eye.
How to bring the lower thread up to the needle plate using the upper thread.
Adjusting pressure on the presser foot for different fabric types and thicknesses.
Placing fabric under the foot, lowering the lifter, and holding threads during the first few stitches.
Reinforcing seams by sewing backwards using the reverse sewing lever.
Testing stitch performance on scrap material and adjusting upper/lower thread tension for balanced stitching.
Attaching the buttonhole foot and positioning the material correctly for sewing.
Adjusting the zipper foot and sewing the right side of the zipper with teeth parallel to the foot's edge.
Re-setting the zipper foot and sewing the left side of the zipper in the same manner.
To Next Page
