Why is my Toyota ESM21 not rotating or working?
Your Toyota Sewing Machine might not be working due to several reasons: the power plug may not be correctly inserted (connect it correctly), the power switch might be off (turn it on), the declutch knob could be in the lower thread winding position (move it back to the needle position), or thread could be tangled (or a needle broken) in the hook (clean the hook).
What to do if the fabric wrinkles when using my Toyota ESM21?
If the fabric wrinkles while sewing with your Toyota Sewing Machine, it could be due to several reasons: the upper thread tension might be too tight (adjust the thread tension), the upper and lower threads may not be correctly threaded (re-thread them), the needle might be too thick for the fabric (use a more appropriate needle), or the needle could be damaged (replace it).
Why is my Toyota ESM21 making a loud noise and rotating slowly?
The loud noise and slow rotation in your Toyota Sewing Machine could be because the oil has run out (oil the shuttle race) or there is thread waste or dust in the hook or feed dog (remove the waste or dust).
Why does too much lower thread appear on the right side of the fabric with my Toyota ESM21?
If too much lower thread appears on the right side of the fabric when using your Toyota Sewing Machine, it could be because the lower thread is not correctly threaded (thread the lower thread correctly), the tension of the upper thread is too tight (adjust the thread tension), or the bobbin is not correctly inserted in the bobbin case (correctly insert the bobbin).
Why does too much upper thread appear on the wrong side of the fabric with my Toyota Sewing Machine?
If too much upper thread appears on the wrong side of the fabric while using your Toyota Sewing Machine, it might be that the upper thread is not correctly threaded, specifically not inserted in the tension disc or not threaded through the thread guide (thread the upper thread correctly). Another cause might be that the tension of the upper thread is too loose (adjust the thread tension).
Why is my upper thread breaking on my Toyota Sewing Machine?
If the upper thread is breaking on your Toyota Sewing Machine, check if the upper and lower threads are correctly threaded (thread them again). Also, the thread may be tangled in the bobbin case or hook (remove thread waste from the feed dog and hook), the tension of the upper thread may be too tight (adjust the thread tension), or the needle might be bent or damaged (replace with a good needle).
Why is my lower thread breaking on my Toyota ESM21?
If the lower thread is breaking on your Toyota Sewing Machine, ensure that the lower thread is correctly threaded (thread the lower thread correctly).
What to do if fabric is not fed through my Toyota ESM21?
If the fabric is not feeding through your Toyota Sewing Machine, it could be due to thread waste in the feed dog (remove thread waste from the feed dog and hook), a darning adapter being installed (remove the darning adapter), or the pattern selection dial being set to "1" or "3" (set a correct pattern).
What causes a broken needle on a Toyota ESM21 Sewing Machine?
A broken needle on your Toyota Sewing Machine can be caused by several factors: the needle may be incorrectly installed (install it correctly), the needle clamp screw might be loose (tighten the screw firmly), the needle could be too fine for the fabric (use an appropriate needle), the upper thread tension may be too tight (adjust the thread tension), the fabric is being pulled too strongly (do not pull the fabric strongly), the wrong presser foot is being used (use a correct presser foot), or the bobbin case is not in the correct position (put it in the correct position).
What causes missed stitches on a Toyota ESM21 Sewing Machine?
Missed stitches on your Toyota Sewing Machine can occur if the needle is not correctly installed (install the needle correctly), the needle is bent (replace with a straight needle), the needle and thread are not appropriate for the fabric (sew with a needle and thread appropriate to the fabric), or the upper thread is not correctly threaded (thread the upper thread correctly).
General| Brand | Toyota |
|---|---|
| Model | ESM21 |
| Category | Sewing Machine |
| Language | English |
Crucial guidelines to prevent damage or injury during operation.
Instructions for safely replacing the power cord or plug.
Identifies and labels key components of the sewing machine.
Step-by-step guide to connect the sewing machine to a power source.
Procedure for removing the bobbin from the bobbin case.
Instructions on how to wind thread onto the bobbin.
Guide on how to insert the wound bobbin and thread the lower thread.
Detailed steps for threading the upper thread through the machine.
Method to bring the lower thread up to the needle plate.
Overview of various stitch patterns and their applications.
Detailed table showing stitch patterns and their corresponding programs.
Instructions for removing and installing different presser feet.
Steps for safely replacing the sewing machine needle.
Guidance on matching needles, threads, and fabrics for quality sewing.
How to perform straight stitches and reverse sewing for reinforcement.
Instructions for executing zigzag stitches and their uses.
Guide to correctly adjusting upper and lower thread tension for balanced stitches.
Method for overcasting fabric edges to prevent fraying.
Technique for creating invisible hems on garments.
Steps for sewing buttonholes of various sizes.
Instructions for sewing zippers into fabric.
Technique for creating decorative gathered fabric effects.
Instructions for free-motion embroidery using a darning adapter.
Guide on operating the automatic needle threader.
How to adjust presser foot pressure for different fabric types.
Instructions for using the drop feed mechanism for free-motion sewing.
Cleaning and oiling the feed dog and hook for optimal performance.
Procedure for correctly installing the shuttle hook.
Steps for replacing the sewing machine's light bulb.
Common problems and their solutions for the sewing machine.
Guidelines for servicing double-insulated electrical products.
Technical details and features of the sewing machine model.
Information on environmentally responsible disposal and recycling.
To Next Page
