34
Sewing
6. Buttonhole
Buttonhole sewing to match the size of the button is possible.
For stretch fabric or thin fabric, a fusible interlining on the wrong side of the fabric will reinforce the
fabric and produce a good finish for the buttonhole.
Before changing the presser foot, remove the power plug from the outlet.
Not doing so could cause an injury.
Change to the buttonhole foot.
(refer to P.21 [Changing the presser foot])
Set the buttonhole size and mark a line on the
fabric.
Note : For stretch fabric or thin fabric, insert a
fusible interlining on the wrong side of the
fabric before sewing.
To Next Page
Loading...
