41
Sewing
Loosen the presser foot holder screw with the
needle plate screw driver to release the holder.
Firmly stretch the fabric with the design and set
in the embroidery hoop.
Note : Purchase a commercially available embroi-
dery hoop.
At the start of sewing, prepare by sewing one
stitch, pulling the upper thread, and pulling out
the lower thread above the fabric.
Hold the upper and lower threads then make 2-3
stitches, snip off excess threads.
Sew along the outline of the design so there is no
clearance between stitches.
To Next Page
Loading...
