353
8-1. Specifications
8
Vehicle specifications
This number is also on the Certi-
fication Label.
■ Engine number
The engine number is stamped
on the engine block as shown.
Engine
Model G16E-GTS
Type 3-cylinder in line, 4-cycle, gasoline
Bore and stroke 3.44 3.53 in. (87.5 89.7 mm)
Displacement
98.7 cu. in. (1618 cm
3
)
Valve clearance Automatic adjustment
Drive belt tension Automatic adjustment
■ Drive belt type
The high strength drive belt is used for the generator side drive belt. When
replacing the drive belt, use Toyota genuine drive belt or equivalent high
strength drivebelt. If the high strength drive belt is not used, durability of
the belt may become less than expected. The high strength drive belt is a
belt with Aramid core which has higher strength compared to usually
available belts with PET or PEN core.
To Next Page
Loading...
