Need help?Do you have a question about the Toyota HC325 and is the answer not in the manual?
General| Type | Electronic |
|---|---|
| Stitch Length Control | Yes |
| Stitch Width Control | Yes |
| Number of Stitches | 25 |
| Free Arm | Yes |
| Stitch Length | 0-4 mm |
| Needle System | HAx1 |
| Machine Weight | 6.5 kg |
| Stitch Type | Decorative |
| Motor Power | 70 W |
Precautions to prevent electric shock hazards.
Warnings about burns, fire, electric shock, and personal injury.
Instructions for servicing double-insulated products.
Procedure for connecting the foot controller and power cord.
Function and operation of the power and light switch.
Usage guide for the foot controller to manage sewing speed.
Instructions for attaching and removing the extension table.
Method for selecting stitch patterns using the pattern selection dial.
Procedure for adjusting stitch length with the dial.
Method for adjusting the width of zigzag stitches.
Details on the three positions of the presser foot lever.
Step-by-step instructions for winding the bobbin.
Procedure for threading the bobbin into its case.
Step-by-step guide for threading the upper thread.
Guide to operating the automatic needle threader.
Procedure for bringing up the lower thread with the presser foot raised.
Guide for performing a blind hem stitch.
Instructions for using the overcasting stitch to prevent fabric fraying.
Specific guidance for overcasting thick and elastic materials.
Steps for executing the overlocking stitch.
Method for creating smocking stitches.
Guidance for performing fabric mending.
Detailed steps for mending a fabric rip.
Procedure for performing applique work with the machine.
Procedure for changing presser feet on the machine.
Instructions for inserting and sewing zippers.
Guidance on inserting piping into fabric.
Advice for achieving optimal embroidery results.
Specific guidance for pin tucking lightweight materials.
Procedure for changing sewing machine attachments.
Steps to create ruffles using the ruffler attachment.
Method for creating and attaching ruffles concurrently.
Oiling procedure for the ruffler attachment.
Method for determining the correct buttonhole length.
Procedure for correctly positioning the buttonhole foot.
Step-by-step guide for sewing a one-step buttonhole.
Procedure for cutting buttonholes after sewing.
Procedure for replacing the sewing machine's light bulb.
Steps for cleaning various parts of the sewing machine.
Procedure for oiling the sewing machine.
Procedure for adjusting lower thread tension.
Method for checking the bobbin case tension.
Steps to adjust the bobbin case tension.
To Next Page