24
1. When the liftgate reaches the desired height, press the rear liftgate close-button
(on the door jam of the liftgate) once. Press and hold the button until the buzzer
sounds (4 times).
2. To reset the height, with the liftgate open and not moving, press and hold the rear
liftgate close-button until the buzzer sounds 4 times, and continue to hold until it
buzzes again, then let go. Press the same button to close the liftgate. When you
open the liftgate next time, it will open to the maximum height.
3. To set the height using the Multi-Information Display, press “
” of the MID
control switches and select “Vehicle settings”*
1
or “ Vehicle Settings”*
2
from
“
”*
1
or “ ”*
2
screen. Press “ ” and select “ PBD” and then press
“
.” Select “Opening Adjustment,” then press “ .” Select desired position (5
height options to choose from,) then press “
.”
NOTE: If battery is disconnected, the power back door needs to be reinitialized.
Power Liftgate: Quickly kick your foot in and out
“
” or “ ” of the MID control switches and select “ PBD” from
1
or “ Vehicle Settings”*
2
from “ ”*
1
or “ ”*
2
screen on
“
”
of a tow hitch receiver or other accessories may require disabling
the kick sensor.
“ ”*
1
or “ ”*
2
and “ ” icons from the HUD section.
Instrument panel
Power Liftgate (back door)
Press and hold to open/close
(close)
Sensor area
(open only)
Carry Smart
Key remote
HEIGHT ADJUSTABLE FUNCTION
HANDS-FREE FUNCTION (IF EQUIPPED)
Height Adjustable, Hands-Free
Power Liftgate
(if equipped)
*1 7-in display, *2 12.3-in display
auto up/down Press the switch completely down or pull it completely
lock switch Deactivates all passenger windows. Driver’s window remains
Press
Press
Press
Kick sensor
Kick sensor Sensor area
Perform the entire kick operation
within 1 second.
FEATURES & OPERATIONS
MY23_RAV4-PRIME_QRG_V2_ML_0907_PRINT.indd 24 9/13/22 11:46 AM
To Next Page
Loading...
