30
FEATURES & OPERATIONS
*
Move the lever partway and release. The signals will flash three times.
Right turn
Lane change
*
Lane change
*
Left turn
Lights & turn signals
Daytime Running Light system (DRL)
Automatically turns on under certain conditions to make vehicle more visible to
other drivers. Not for use at night. (The parking brake needs to be released and the
headlight switch must be in the “
” or “ ” position while the vehicle is on.
Automatic light cut off system (AUTO)
- Headlights are on: The lights will turn off automatically 30 seconds after the
vehicle is turned from ON to ACCESSORY or OFF and a door
is opened and closed. (If the “
” switch on the Smart Key
remote is pressed after all the doors are closed, the lights will
turn off immediately.)
- Only the taillights are on: The taillights will turn off automatically if the vehicle is
turned from ON to ACCESSORY or OFF and the driver’s
door is opened.
Automatic High Beams system (AHB)*
Automatically switches between high and low beams as appropriate to enhance
vision at night.
Refer to Toyota Safety Sense™ 2.5+ (TSS 2.5+) in this guide or the “Owner’s
Manual” for more details on the Automatic High Beams feature.
* Operating conditions must be met. Refer to the “Owner’s Manual” for details.
HEADLIGHTS
TURN SIGNALS
wiper
Rotate to
Low beam
(Original position)
High beam flasher
(Pull)
High beam
(Push)
Operating the switch turns on the headlight indicator .
Parking lights (
)
Auto (
)
DRL OFF (
)
Headlights (
)
Do not attempt to adjust while the vehicle is in motion.
MY23_RAV4-PRIME_QRG_V2_ML_0907_PRINT.indd 30 9/13/22 11:46 AM
To Next Page
Loading...
