Toyota RAV4 PRIME 2023 - Blind Spot Monitor with Rear Cross Traffic Alert (BSM w;RCТА)

43
The Blind Spot Monitor is a system that has two functions:
• The Blind Spot Monitor function (assists the driver in making the decision when
changing lanes)
• The Rear Cross Traffic Alert function (assists the driver when backing up)
The system is designed to use radar sensors to detect vehicles traveling in the
RAV4 Prime’s blind spot. If a vehicle is detected, the driver will be alerted via the
outside rear view mirror indicator on the detected side.
Rear Cross Traffic Alert function:
While in reverse, when a vehicle approaching from the right or left rear of the RAV4
Prime is detected, the outside rear view mirror indicators will flash. Also, the RCTA
icon for the detected side will be displayed on the Multimedia display, and the
RCTA buzzer will sound.
Blind Spot Monitor with Rear Cross
Traffic Alert (BSM w/RCTA)
Buzzer*
* RCTA only
Multi-Information Display (MID)
Indicators
Multimedia
display*
OVERVIEWELECTRIC VEHICLE SYSTEMFEATURES & OPERATIONSTOYOTA SAFETY SENSE
SAFETY &
EMERGENCY FEATURES
(1) Press “ ” or “ ” switches and select “ (7-in display)” or “ (12.3-in
display)” from the Multi-Information Display (MID).
(2) Press “
” switches and select “ BSM” or “RCTA” then press “ ” to turn
BSM or RCTA On/Off.
Refer to the “Owner’s Manual” for limitations and more details on this system before
attempting to use it.
SYSTEM ON/OFF
Outside rear view
mirror indicator
Outside rear view
mirror indicator
Panoramic View Monitor (PVM) (if equipped)
and rear cameras and displaying an overhead image on the screen.
the shift lever is in the “P” position and the intuitive parking assist is enabled.
system before attempting to use it.
MY23_RAV4-PRIME_QRG_V2_ML_0907_PRINT.indd 43 9/13/22 11:46 AM