48
TOYOTA SAFETY SENSE
™
PRE-COLLISION SYSTEM (CONTINUED)
Monocular camera sensor
Millimeter
wave radar
As part of the Pre-Collision System, this function is also designed to first provide an
alert and then automatic braking if needed.
Refer to the Toyota “Owner’s Manual” for additional limitations and information.
Under certain conditions, the PCS included with the TSS 2.5+ package may also
help to detect a pedestrian or bicyclist in front of your vehicle using the forward-
facing camera and the front grille-mounted radar. The forward-facing camera of
PCS detects a potential pedestrian or bicyclist based on size, profile, and motion
of the detected pedestrian or bicyclist. However, a pedestrian or bicyclist may not
be detected depending on the conditions, including the surrounding brightness
and the motion, posture, size, and angle of the potential detected pedestrian or
bicyclist, preventing the system from operating or engaging.
PCS PEDESTRIAN DETECTION
” or “ ” switches and select “ (7-in display)” or “ (12.3-in
from the Multi-Information Display (MID).
” switches and select “ PCS” and then press and hold “ .” The
” switches and select “Sensitivity” and then press “ ” to change
” to go back to the menu.
each time the vehicle is turned on.
The system can be
and the alert timing of the system can be changed. (Alert
only, brake operation remains the same.)
” or “ ” switches and select “ (7-in display)” or “ (12.3-in
from the Multi-Information Display (MID).
” switches and select “ PCS” and then press and hold “ .” The
” switches and select “ PCS” and then press “ ” to turn PCS
” to go back to the menu.
Pre-Collision Warning
When the system determines that the possibility of a frontal collision is high, a
buzzer will sound and a warning message will be displayed on the Multi-Information
Display (MID) to urge the driver to take evasive action.
Pre-Collision Brake Assist
If the driver notices the hazard and brakes, the system may provide additional
braking force using Brake Assist. This system may prime the brakes and may apply
greater braking force in relation to how strongly the brake pedal is depressed.
Pre-Collision Braking
If the driver does not brake in a set time and the system determines that the
possibility of a frontal collision with a preceding vehicle is extremely high, the
system may automatically apply the brakes, reducing speed in order to help the
driver reduce the impact and in certain cases avoid the collision.
MY23_RAV4-PRIME_QRG_V2_ML_0907_PRINT.indd 48 9/13/22 11:46 AM
To Next Page
Loading...
