Toyota START+ - Page 16

TOYOTA ─ Remote Engine Starter Page 14
OPERATION (PRIMARY FEATURES)
REMOTE ENGINE START (TYPE B)
To remotely start vehicle engine, press and release the LOCK button twice within two
seconds, then press and hold the LOCK button for three seconds.
STEP 1.
Press and release the LOCK button on the remote twice within two seconds.
The hazard lights will flash each time.
A
) Press and
release the
LOCK
button.
B) The hazard
lights flash
once.
C) Press and
release the
LOCK
button
again.
D) The hazard
lights flash
again.
FOLLOWED IMMEDIATELY BY:
STEP 2.
Press and hold the LOCK button on the remote for three seconds. The hazard lights
flash once when pressed, then again after three seconds. The engine starts, and the
hazard lights flash for 10 seconds.
A
) Press and
hold the
LOCK
button for
three
seconds.
B) The hazard
lights flash
once.
C) After three
seconds,
the hazard
lights flash
several
times.
D) The engine
starts and the
hazard lights
flash for 10
seconds.
THREE SECONDS 10 SECONDS
TWO SECONDS
Market: Canada