49
GB
DEHUMIDIFIER
2. Humidity Button
Humidity
Press this button to adjust the humidity. After each pressing of humidity button,
the set humidity will increase 5% in the range of 30% RH ~ 80% RH circularly.
Hold the humidity button can adjust the humidity quickly.
3. Health Button
Health
Under dehumidifi cation mode, it’s defaulted that UV and ION function is turned
on.
Press this button to select and display a health mode in the following order:
Hold this button for 3 seconds to enter or exit single health mode. Under health
mode, the dehumidifi cation function will be off, and the display window will
display “- -”.
Under health mode. Press this button to select and display a health mode in
the following order:
4. Fan Button
Fan
Press this button to switch from High fan speed to Low fan speed. When you
need fast dehumidifi cation, select high fan speed. When you need the unit to
work quietly, select low speed.
Lock Function: Hold Fan button for 3 seconds to enter or exit child lock status.
When the unit enters child lock status, the display window will fl ash “LC”
3 times. At this time, pressing other buttons will be invalid and “LC” will be
displayed.
UV and ION
Turn off
ION
UV
IONUV and ION
UV