52
GB
DEHUMIDIFIER
Gravity Drain Hose
1. 0.5m hose is provided. Longer size hose can be found it in the market. The
hose should have an inner diameter of 14mm.
2. Unscrew the drain cover, and pull out the rubber plug from the unit.
3. Take out the adaptor and connect it fi rmly to the continuous drainage port.
4. Thread the drain hose onto the adaptor and make sure it’s securely locked.
5. Replace properly the bucket. Make sure the drain hose goes through the
bucket’s drain hole and is placed downward. Lead the hose to the fl oor
drain and thn cover the holes with a lid. Note that drain hose should not be
pressed, otherwise water can not be drained out.
Note:
When you want to take off the drain hose, prepare a receptacle to collect water
from the nozzle.
CLEAN AND MAINTENANCE
Warning:
• Before cleaning, turn off the dehumidifi er and disconnect power. Otherwise it
may lead to electric shock.
• Do not wash the dehumidifi er with water or other kind of liquid, or it may lead
to electric shock.
To Next Page
Loading...
Need help?
General
