Turn On
1 Manually Turn On: After the headset is in close status, tap and hold the touch control for 3 seconds and release it, the blue light will turn
on. Then looking for the phone with the last connect connection memory within 10s after the headset is turned on.lf it is not found, enter
the pairing state (the red and blue lights flash alternately).
2.Auto Turn On: When the earbuds are in the charging case, you can pick it up and it will automatically turn on. Then finding the phone
with the last connect connection memory within Los after the headset is turned on.lf it is not found, enter the pairing state (the red and blue
lights flash alternately).
Turn Off
1 Manually Turn Off: Tap the Touch Control 5 seconds for turn off in not playing status and then release it, the red light will turn off after
one second.
2.Auto Turn Off: Take the earbuds into the charging case and charge it for 3 seconds, then the red light will be on to turn off automatically.
TWS pairing Timeout
After the two earbuds are paired for more than 60 seconds on TWS, if they are not successfully paired, they will enter the mobile phone
pairing state.
Phone Pairing
When the earbuds are turned off, tap and hold the touch control simultaneously for 5 seconds and release them to pairing mode (the
red/blue light flashes alternately),then searching for pairing name
•TOZO-NC9*and select it in your mobile phone.
1.Take out the 2 headsets from the charging base, they will power on automatically and will connect to each other automatically within 10
seconds.
2.The two earbuds flash red and blue alternately(Pairing mode)
3.Search for pairing name”TOZO-NC9’and select it in your mobile phone.
Auto Turn Off
Automatically Turn Off after no connection for more than 5 minutes.
After the headset is disconnected from the phone at a long distance, it will automatically turn off after more than 5 minutes.
Restore Factory
Settings
In case the reset step not resolve your issue, please restore to the factory setting :
1.Pick up two earbuds from the charging case, then holding both earbuds button for 5 seconds till red lights on to turn off earbuds.
2. Holding the MFB Touch Panel on each of the earbuds for 5 seconds till blue light turn on and off, and then clicking the MFB
Touch Panel on each of earbuds 3 times quickly, the Restore Factory Settings process will be done when the red light .
3.Put earbuds into the charging case, and then take them out to connect records of “TOZO-NC9″on your phone.Note: After Restore
Factory Settings successfully, please delete all connection records of ‘TOZO-NC9
–
on your phone, then research again.
Turn on for
re-connection
1.Tap the touch control for 3 seconds and release to turn on the earbuds-
,
wait for a few seconds for the earbuds to automatically
interconnect with each other—wait for a few seconds for the earbuds to connect with the paired phone -. the connection is successful.
2.Take out the earbuds from the charging case—wait for a few seconds for the earbuds to automatically interconnect with each other-.wait
for a few seconds for the earbuds to connect with the paired phone -* the connection is successful.
Over distance
for re-connection
After the headset is disconnected from the phone at a long distance, it can automatically reconnect when it returns to the close distance
with the phone within 5 minutes. More than 5 minutes. the headset will automatically turn off.
Answer Phone Call Tap the touch control once to answer the incoming call
Hang up Phone Tap and hold the Touch Control for 2 seconds to hand up the phone.
Reject Incoming Call Tap and hold the Touch Control for 2 seconds to reject the incoming call.
Cancel dialing Tap and hold the Touch Control for 2 seconds to cancel dialing before dialing out and the other party fails to answer.
Play/Pause When playing music, tap the Right touch control once to pause/play(The left headset cannot switch to play/pause).
Next Track Double-Tap the Right Touch Control twice for backward when playing music.
Previous Track Double-Tap the Left Touch Control twice for previous when playing music.
Volume + Tap and hold the Touch Control on Right earbud when playing music.
Volume – Tap and hold the Touch Control on Left earbud when playing music.
Voice interaction of Sid In standby mode, quickly tap the Touch control 3 times to turn on the voice interaction of the mobile phone.
Primary / Secondary
switch automatically
When listening to music, put either headset back into the charging case. and the other headset will not be affected.
Function List
To Next Page
Loading...
Need help?
General
