TP-Link AC2100 Quick Installation Guide

Set up with videos:
Scan the QR code or visit
https://www.tp-link.com/support/setup-video/
to search for the setup video of your product.
Quick Installation Guide
1. Set up the Modem Router
AC2100 Wireless MU-MIMO
VDSL/ADSL Telephony Modem Router
Archer VR2100v
2. Connect the Phone
Open the registration page on your cordless phone. Press and hold the DECT
button on the modem router for about 3 seconds until the Phone LED
ashes.
A
B
Enter the PIN (Default: 0000) on the cordless phone if required.
Analog Phone
DECT Cordless Phone
DECT
Connect your analog phones to the Phone ports on the modem router's
back panel. You may connect up to two.
Flashing
Phone1 or 2
DECT
Within 1 minute Press for about 3 seconds
DSL
Phone2
Phone1
DECT
Reset
WLAN
WPS
Power On/O
USB
DSL
Phone2
Phone1
DECT
Reset
Power Adapter
Connect the modem router
to the DSL splitter.
For traditional landline phone service
Modem Router
3
Connect the DSL splitter to the phone jack.
Note: If you won’t use the traditional landline phone service, you
can directly connect the modem router to the phone jack.
2
DSL Splitter
Phone Jack
PHONE MODEM
LINE
Push in to turn on the
modem router.
4
1
Attach the antennas.
DECTReset

TP-Link AC2100 Specifications

General

MU-MIMO	Yes
Beamforming	Yes
Wi-Fi Speed	1733 Mbps at 5 GHz, 300 Mbps at 2.4 GHz
Frequency Bands	2.4 GHz and 5 GHz
Ports	1 Gigabit WAN Port, 4 Gigabit LAN Ports
VPN Support	VPN Server
Security	WPA, WPA2, WPA3