TP-Link Archer AC1200 - User Manual

Configuring a TPLINK Router
TP Link Archer AC1200 Basic Configuration
Steps

Summary

Connect Your PC to the Router

PC Connection and Gateway Identification

Connect PC to router via LAN cable and identify the default gateway IP address.

Connect Your Mobile Device

Mobile Wi-Fi Connection

Connect your mobile device to the router's Wi-Fi network by selecting and connecting.

Logging into the Router Interface

Accessing Router Settings

Open a browser, enter the router's IP address, and log in with credentials.

Internet Connectivity Configuration

PPPoE Connection Setup

Configure PPPoE connection type, username, and password for internet access.

Wi-Fi Connectivity Configuration

Setting Wi-Fi SSID and Password

Define the Wi-Fi network name (SSID) and password for both 2.4GHz and 5GHz bands.

Firmware Upgrade Procedure

Performing Router Firmware Update

Upload new firmware file or download directly to upgrade the router's firmware.

Wi-Fi Channel Optimization

Selecting Optimal Wi-Fi Channel

Select the least utilized Wi-Fi channel using a Wi-Fi analyzer for better performance.

Updating Wi-Fi Password After Changes

Updating PC Wi-Fi Password

Forget and reconnect to the network on Windows PCs to use the new Wi-Fi password.

Updating Mobile Wi-Fi Password

Forget and reconnect to the network on mobile devices with the new Wi-Fi password.

TP-Link Archer AC1200 Specifications

General

Frequency Band	2.4 GHz and 5 GHz
LAN Ports	4 x 10/100 Mbps
WAN Port	1 x 10/100 Mbps
Antenna	4 x External Antennas
USB Port	1 x USB 2.0
Security	WPA/WPA2, WPA-PSK/WPA2-PSK
Operating Temperature	0°C to 40°C (32°F to 104°F)
Operating Humidity	10% to 90% non-condensing
Wireless Standard	802.11ac/n/a 5 GHz, 802.11n/b/g 2.4 GHz
Wi-Fi Speed	867 Mbps at 5 GHz, 300 Mbps at 2.4 GHz
Processor	Unknown
Memory	Unknown
Power Supply	12V/1A