TP-Link AC2300 - User Manual

To Next Page

Connect the power adapter

to the router and turn on

the router.

Connect the Hardware

Verify that the following LEDs are on and solid to confirm the

hardware is connected correctly.

Note: If the 2.4GHz LED and 5GHz LED are off, press and hold the Wi-Fi On/Off button

on the side panel for 2 seconds, then release the button. Both LEDs will turn solid on.

If your internet connection is through an Ethernet cable directly from the wall

instead of through a DSL/Cable/Satellite modem, connect the Ethernet cable

to the router’s Internet port, and then follow Step 4 and 5 to complete the

hardware connection.

Modem

Power adapter

Router

Turn off the modem,

and remove the backup

battery if it has one.

Connect the modem to the

router’s Internet port with an

Ethernet cable.

Turn on the modem, and

then wait about 2 minutes

for it to restart.

Internet

5GHz

2.4GHz

Power

Internet

Quick Installation Guide

Images may dier from actual products.

AC2300 Wireless MU-MIMO Gigabit Router

Need help?

Do you have a question about the TP-Link AC2300 and is the answer not in the manual?

TP-Link AC2300 Specifications

General

Wireless Standard	IEEE 802.11ac/n/a 5 GHz, IEEE 802.11b/g/n 2.4 GHz
Frequency Bands	2.4 GHz and 5 GHz
USB Ports	1 USB 3.0 port
MU-MIMO	Yes
Beamforming	Yes
Antennas	3 external antennas
Memory	128 MB Flash, 512 MB RAM
Processor	Dual-Core CPU
Ethernet Ports	1 Gigabit WAN Port + 4 Gigabit LAN Ports
Security	WPA/WPA2