21Appendix A Troubleshooting
5. If you still cannot access the configuration page, please restore the device to its factory
defaults. Then the IP address should be set as 192.168.0.x ("x" is any number from 2 to 252)
and Subnet Mask as 255.255.255.0.
Q6.
Q4. Why does the page display abnormally?
Please check as follows:
1. Update your browser or replace it with another browser, and try again.
2. If the pop-up is blocked, please lower the security level of the browser.
■
For more troubleshooting help, go to: http://www.tp-link.com/en/support/faq
■
To download the latest Firmware, Driver, Utility and User Guide, go to:
http://www.tp-link.com/en/support/download
To Next Page
Loading...
