EasyManua.ls Logo

TP-Link AC500 - Chapter 2 Installation; Package Contents; Safety Precautions

TP-Link AC500
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Wireless Controller
05Installation
Chapter 2 Installation
2.1 Package Contents
Make sure that the package contains the following items. If any of the listed items is
damaged or missing, please contact your distributor.
One Power Cord
One Wireless Controller
This Installation Guide
Installation Guide
Business Networking Solution
Two mounting brackets and
the ttings
Note:
Here we take AC500 as an example. The package of AC50 doesn't include
mounting brackets and the ttings.
2.2 Safety Precautions
To avoid any device damage and bodily injury caused by improper use, please observe
the following rules.
Safety Precautions
Keep the power off during the installation.
Wear an ESD-preventive wrist strap, and make sure that the wrist strap has a good skin
contact and is well grounded.
Use only the power cord provided with the device.
Make sure that the supply voltage matches the specifications indicated on the rear
panel of the device.
Ensure the vent hole is well ventilated and unblocked.
Do not open or remove the cover of the device.
Before cleaning the device, cut off the power supply. Do not clean it by the waterish
cloth, and never use any other liquid cleaning method.

Other manuals for TP-Link AC500

Related product manuals