74
Chapter 13
Customize Your Network Settings
data packets. In the example, the data are sent to the gateway
through the LAN port of Router A, so LAN should be selected.
Description: Enter a description for this static routing entry.
5. Click OK.
6. Check the System Routing Table below. If you can find the
entr
y you’ve set, the static routing is set successfully.
Open a web browser on your PC. Enter the company server’s IP
address to visit the company network.
13. 6. Specify Wireless Settings
The router’s wireless network name (SSID) and password, and security option are preset
in the factory. The preset SSID and password can be found on the label of the router.
You can customize the wireless settings according to your needs.
Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the
r
outer.
¾ To use the Smart Connect function
Smart Connect allows each of the router’s wireless bands to use the same wireless
settings. The router can balance network demand and assign devices to the optimum
band.
1. Go to Basic > Wireless.
2. Enable Smart Connect.
Done!
To Next Page
Loading...
