89
Chapter 14
Manage the Router
• To restore configuration settings:
1. Click
BROWSE to locate the backup configuration file stored on your computer, and
click
RESTORE.
2. Wait a few minutes for the restoring and rebooting.
Note: During the restoring process, do not turn off or reset the router.
• To reset the router except your login password and TP-Link ID:
1. In the
Factory Default Restore section, click RESTORE.
2. Wait a few minutes for the resetting and rebooting.
Note:
• During the resetting process, do not turn off the router.
• After reset, you can still use the current login password or the TP-Link ID to log in to the web management page.
• To reset the router to factory default settings:
1. Click
FACTORY RESTORE to reset the router.
2. Wait a few minutes for the resetting and rebooting.
To Next Page
Loading...
