81
Chapter 13
Manage the Router
3. Select the correct End date and time when daylight saving time ends at your local
time zone.
4. Click Save.
13. 2. Control LEDs
The router‘s LEDs indicate router’s activities and status. You can turn on or turn off the
LEDs either from the web management page or by pressing the LED button.
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced > System Tools > LED Control.
• To control LED:
Toggle on LED Status to turn on the LED while toggle off to turn off the LED.
• To enable Night Mode:
1. Tick the Night Mode checkbox.
2. Specify a time period in the LED Off Time as needed, and the LEDs will be off during
this period.
3. Click Save.
13. 3. Test the Network Connectivity
Diagnostics is used to test the connectivity between the router and the host or other
network devices.
To Next Page
Loading...
