EasyManuals Logo

TP-Link Archer C20 Quick Installation Guide

TP-Link Archer C20
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Quick
Installation Guide
AC750 Wireless Dual Band Router
2. Configure the Router
Typical Connection
7106505764 REV1.0.0
Open a web browser on the computer and configure the router according to the following main clues.
2
Modem
INTERNET
WPS/
Reset
Power
On/Off
PowerInternet Ethernet1 2 3 4 USB
Wireless
On/Off
Wired
Connect wirelessly by using
the default network name
(SSID) and password on the
product label printed on the
bottom of the router.
Or
Wireless
1
Connect your computer to the router (Wired or Wireless).
Ethernet cable
WPS/
Reset
Power
On/Off
Power
Internet Ethernet1 2 3 4
USB
Wireless
On/Off
On
Power off the modem,
and remove the backup
battery if any.
Connect the modem to the
Internet port on your router using
an Ethernet cable.
Power on the modem,
wait for 2 minutes and
then power on the router.
Check the following LED
lights to ensure the hardware
connection is correct.
21 3 4
Power
On
2.4G/5G
On
Power Off
Power On
LAN
Power On
Internet
1. Connect the Hardware
INTERNET
Note: If your Internet comes via an Ethernet cable from the wall instead of any DSL/Cable/Satellite modems, please connect the Ethernet cable directly to the router’s Internet port.
INTERNET INTERNET
WPS/
Reset
Power
On/Off
Power
Internet
Ethernet
1 2
3 4 USB
Wireless
On/Off
WPS/
Reset
Power
On/Off
PowerInternet Ethernet1 2 3 4 USB
Wireless
On/Off
Login
http://tplinkwifi.net
admin
admin
Run the Quick Setup to manually configure your Internet connection and wireless settings.
To continue, please click the Next button.
Next
Quick Setup - Start
Type in your user name and password (admin/admin by
default) and click Login.
Note: If the login window does not appear, please refer to FAQ->Q1.
Enter http://tplinkwifi.net in the address bar.
Alternatively, enter http://192.168.0.1 or
http://192.168.1.1.
a
b
The Quick Setup will pop up. Click Next to continue.
Enter the Username and Password provided by your ISP. These
fields are case-sensitive.
Click Next to skip to Step .
e
c
For IPTV/ VOIP users, please choose your connection
type from Exstream, Unifi, Maxis or Custom and
proceed with Step . For others, please choose
Normal and skip to Step . If you do not know which
type to choose, please contact with your ISP.
Click Next to continue.
Here we take Unifi mode as an example. Choose LAN type
and enter the correct VLAN ID.
Click Next to continue.
d
Back
Next
Quick Setup - Choose Working Mode
Normal
Exstream
Unifi
Maxis
Custom
Back
Next
Quick Setup - Unifi
VLAN ID : 600
VLAN ID : 500
VLAN ID : 500
VLAN ID : 500
LAN2: Internet
LAN1: IPTV
LAN3: Internet
LAN4: Internet
Back
Next
Quick Setup - PPPoE
Username:
Password:
Disabled
Confirm password:
Secondary Connection: Dynamic IP Static IP (For Dual Access)
h
d
f
Turn off the Wi-Fi on your computer and connect devices as shown below:
AC750 Wireless Dual Band Router
Wireless
Password
/PIN
SSID
SSID:TP-LINK_XXXX
SSID:TP-LINK_XXXX_5G

Other manuals for TP-Link Archer C20

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the TP-Link Archer C20 and is the answer not in the manual?

TP-Link Archer C20 Specifications

General IconGeneral
Colorblue/white, blue
Wi-Fi Speed0.733 gigabits per second
Band Technologydual
Frequency Band2.4 ghz, 5.0 ghz
QoS Traffic Prioritizationyes
Ethernet Standard10/100
Ethernet Switchyes
Wireless Networking Standardwi-fi 5
Wireless Standardac, n
2.4 Ghz Streams1
5.0 Ghz Streams1
Antennas3
Firewallspi
Data Encryptionyes
Encryption Typewpa, wpa2, wpa-psk, wpa2-psk
Portsrj-45
LAN Ports4
WAN Ports1
Built In Modemno
Weight and Dimensions IconWeight and Dimensions
Height1.4 inches
Width9.1 inches

Related product manuals