English
8
XX-XX-XX-XX-XX-XX
XX-XX-XX-XX-XX-XX
MAC Clone
Save
WAN MAC Address:
Your PC’s MAC Address:
Restore Factory MAC
Clone MAC Address
Q3. How do I restore the router to its factory default settings?
A1. While the Archer C7 is powered on, press and hold the ‘WPS/Reset’ button on
the rear panel of the router for approximately 8 seconds.
A2. Log in Web Management page of the router, and go to System tools->Factory
Defaults, click Restore, then wait until the progress bar loading nished.
Q4. What can I do if I forget my
password?
Web Management page password:
A. Restore the router to its factory default
settings and then use the default
User Name ‘admin’ and Password
‘admin’ to log in.
Wireless Network password:
A1. The factory default password can be
found on the product label printed on the bottom of the router.
A2. If you have changed your password, log in to the router’s Web Management
page, go to Wireless>Wireless Security to obtain or reset your password.
Note: If your questions are not answered here, please refer to http://www.tp-link.com/en/support/faq and click Contact
Technical Support for further assistance.
LED Indicators
Name Status Indication
(Power)
O Power is o.
On Power is on.
(System)
O The router has a system error.
On
The router is initializing or maybe has a system
error.
Flashing The router is working properly.
(Wireless
2.4GHz)
O The wireless 2.4GHz band is disabled.
Flashing The wireless 2.4GHz band is working properly.
WPS/Reset Button
Press & Hold 8 seconds
To Next Page
Loading...
