English
9
(Wireless
5GHz)
O The wireless 5GHz band is disabled.
Flashing The wireless 5GHz band is working properly.
(Ethernet) O
No device is connected to the corresponding
port.
On
There is device(s) connected to the
corresponding port(s) but no activity.
(Internet) Flashing
There is device(s) connected to the
corresponding port(s) and active.
(WPS)
On/O
It turns on when a wireless device has been
successfully connected to the network via WPS.
After about 5 minutes, the WPS LED will turn o.
Slow Flash
A wireless device is trying to connect to the
network via WPS. This process may take up to 2
minutes.
(USB on
the rear
panel)
O No USB device is plugged into the USB port.
On There is a USB device plugged into the USB port.
To Next Page
Loading...
