Quick Installation Guide
AC1200 Wireless Dual Band DOCSIS 3.0
Cable Modem Router
1. Keep the power on at all times during this process.
2. If the Internet LED does not turn solid after about 1 minute, call your
ISP’s customer service.
3. If the wireless LED is o, press the WiFi ON/OFF button on the back
panel, then check the LEDs again.
Connect the Hardware
Activate the Modem Router
Enjoy the Internet
2
3
1
Wait for about 1 minute until the following LEDs turn solid.
Notes:
Connect the coaxial cable and power adapter to the
modem router, then power on your modem router.
Connect your computer to the modem router via a wired
or wireless connection.
Connect the computer to the modem router’s LAN port via an Ethernet
cable.
On your computer, select and connect to the modem router’s wireless
network. The default wireless network name (SSID) and password are
printed on the Information Card.
Or you can set up a connection via the WPS button, which is on the back
panel of the modem router. For more information about WPS, refer to the
User Manual at http://www.tp-link.com.
Wired:
Wireless:
If you want to customize the wireless network, please
filp this piece of paper to see detailed instructions.
If you are unable to access the Internet, refer to FAQ > Q1 for instructions.Note:
After activating your modem router successfully, wait for about
10 minutes till these LEDs become solid on, then you
can enjoy the Internet.
Internet
Coaxial cablePower adapter
1
Get your Internet service account information and the modem
router’s Information Card ready.
Launch a web browser, and visit any website. You will be
automatically redirected to your service provider’s
self-activation page.
2
Make sure your computer is set to dynamically obtain an IP
address.
Bright House: 1-855-222-0102
Charter: 1-888-438-2427
Comcast: 1-855-OK-BEGIN (1-855-652-3446)
Cox: 1-888-556-1193
Time Warner Cable: 1-888-892-2253
The contact information listed might change. You can also nd the contact information
in your monthly Internet service billing statement.
Contact information of major cable ISPs:
Follow the on-screen self-activation instructions to
activate the modem router.
If you have any problem activating your modem router, call
your ISP’s customer service .
3
4
Serial Number
MAC Address
Wi-Fi Password/PIN
SSID
Information Card
CR500
To Next Page
General
Weight and Dimensions
