15
Chapter 4
Set Up Internet Connection
parameters are needed according to the secondary connection you have
chosen.
5 ) If you choose PPTP, enter the Username and Password, and choose the
secondary connection (Dynamic IP or Static IP) provided by your ISP. Different
parameters are needed according to the secondary connection you have
chosen.
5. Click SAVE .
Tips:
• If your internet connection type is BigPond Cable, please go to Advanced > Network > Internet to set your router.
• If you use Dynamic IP and PPPoE and you are provided with any other parameters that are not required on the page,
please go to Advanced > Network > Internet to complete the configuration.
• If you still cannot access the internet, refer to the FAQ section for further instructions.
To Next Page
Loading...
