Quick Installation Guide
Wireless 4G LTE Router
1. Connect the Hardware
Images may dier from actual products.
©2020 TP-Link 7106509067 REV5.1.0
Check the following LEDs’ status. If the Internet LED is on, your router is connected
to the internet successfully.
3. Enjoy the Internet2. Verify the Hardware Connection
Note: If the Internet LED does not turn on, please refer to Need Help? > Q2 on the back page.
Power
On
On
Internet
On
Wi-Fi
For better internet connection, make sure 2 or 3 bars of the Signal Strength LED
are lit. Otherwise, try relocating the router to a spot that may receive a stronger mobile
network signal, such as near a window.
Wired
Connect your computer to the router's LAN port via an Ethernet cable.
Wireless
Find the SSID (network name) and wireless password printed on the label at the
bottom of the router.
a.
Click the network icon of your computer or go to Wi-Fi settings of your smart device,
and then select the SSID to join the network.
b.
Note: For a dual-band router, you can nd two default SSIDs. Choose one to join the Wi-Fi.
Note: Do not insert any object into the slot.
c. Connect the
power adapter
to the router.
b. With the gold contacts
facing down, insert the
nano SIM card into the
slot until you hear a
click.
Power adapter
Router
a. Install the antennas
and position them
upwards.
To Next Page
Need help?
General
