3
Chapter 1
Get to Know about Your Adapter
1. 1. Product Overview
TP-Link Wireless USB Adapter connects your computer to a Wi-Fi network for
smooth HD video, voice streaming and online gaming.
• The high-gain antennas greatly enhance the reception and transmission signal
strength of the USB adapter.
• Utilizes 802.11ax standard and is backward compatible with 802.11a/b/g/n/ac*.
• Supports WEP, WPA/WPA2/WPA3, WPA-PSK/ WPA2-PSK*.
• Supports Windows 10(32-bit), Windows 10/11(64-bit)*.
1. 2. LED Status
You can check the adapter’s working status by following the LED explanation
table.
Status
Indication
On The driver has been installed successfully.
Off
The driver is not installed.
The adapter is not detected.
Tips:
If the LED is off, try these troubleshooting tips:
1. Check if the adapter is recognized and enabled or not. Refer to Appendix: Troubleshooting for detailed
instructions.
2. Remove and reinsert the adapter.
3. Reinstall the software, if necessary.
To Next Page
Loading...
