44
Chapter 9
IoT Network
1. Visit http://tplinkwifi.net, and log in with your TP-Link ID or the password you set for
the router.
2. Go to Advanced > Wireless > IoT Network.
3. Create an IoT network as needed.
1 ) Tick the Enable checkbox for the 2.4GHz, or 5 GHz wireless network. For the 5
GHz network, make sure your IoT devices can connect to a 5 GHz network.
2 ) Customize the SSID. Don‘t select Hide SSID unless you want your IoT devices
to manually input the SSID for network access.
3 ) Select the Security type and customize your own password. If No security is
selected, no password is needed to access the IoT network.
4. Click SAVE . Now you can connect your IoT devices to the dedicated IoT network.
5. You can also click Share Network to share the SSID and password to others.
To Next Page
Loading...
