69
Chapter 13
Network Security
3 ) The Operation Succeeded message will appear on the screen, which means the
selected devices have been successfully added to the allow list.
• Add unconnected devices
1 ) Click Add Manually.
2 ) Enter the Device Name and MAC Address of the device you want to be allowed
and click ADD.
3 ) The Operation Succeeded message will appear on the screen, which means the
device has been successfully added to the allow list.
Done!
Now you can block or allow specific client devices to access your network (via wired or
wireless) using the Deny List or Allow List.
13. 3. IP & MAC Binding
IP & MAC Binding, namely, ARP (Address Resolution Protocol) Binding, is used to bind
network device’s IP address to its MAC address. This will prevent ARP Spoofing and
other ARP attacks by denying network access to an device with matching IP address in
the Binding list, but unrecognized MAC address.
To Next Page
Loading...
