If your internet connection is through an Ethernet cable
directly from the wall instead of through a DSL / Cable /
Satellite modem, connect the Ethernet cable to the
router’s WAN port, then follow step 4 and 5 to complete
the hardware connection.
Quick Installation Guide
http://tplinkwi.net
New Password:
Conrm Password:
Let’s Get Started
2. Launch a web browser, and enter http://tplinkwifi.net or
http://192.168.0.1 in the address bar. Create a password
to log in.
Note: If the login window does not appear, please refer to FAQ > Q1.
3. Follow the step-by-step instructions to set up the internet connection.
Note: If you are not sure of the Connection Type, please click AUTO DETECT or contact
your ISP (Internet Service Provider) for help.
1. Connect your computer to the router (Wired or Wireless)
Congure the router
Wired
Turn o the Wi-Fi on your computer and connect it to the router
via an Ethernet cable.
*Images may dier from the actual product.
Modem
Router
Power adapter
Connect to the internet
Connect to the power socket
Power on the modem and then wait
about 2 minutes for it to restart.
Connect the powered-o modem to the
router’s WAN port via an Ethernet cable.
Wireless
Dual-Band Wi-Fi Router
Tether App
The TP-Link Tether app provides a simple, intuitive way to
access and manage your router. Scan the QR code to
download Tether from the Apple App Store or Google Play.
Verify that the LED turns solid
on before continuing.
Unplug your modem, and remove
the backup battery if it has one.
Important
Connect the power adapter to the router.
a
Find the product label at the bottom
of the router.
Scan the QR code to join the preset
2.4 GHz network directly, or use the
default network names (SSIDs) and
password to join the networks.
b
Wireless Password/PIN:XXXXXXXX
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
QR
Code
To Next Page
Need help?
General
