TP-Link Deco E4/W2400 - Remove or Reboot Deco; Check Deco Status Before Action; Access Deco Details; Execute Remove or Reboot

13
Remove/Reboot Deco
You can remove or reboot your Deco easily on the Deco app. Follow the steps below.
Tap to check all Decos' status Tap to remove or reboot the Deco
Note: If the LED light of Deco does not turn pulsing
blue after tapping Remove, refer to Appearance to
press the Reset button to reset it.
Tap a Deco unit to enter the details