Need help?Do you have a question about the TP-Link CPE710 and is the answer not in the manual?
General| Flash memory | 16 MB |
|---|---|
| Internal memory | 128 MB |
| Built-in processor | Yes |
| Processor frequency | 750 MHz |
| Antenna gain level (max) | 23 dBi |
| Compatible operating systems | Microsoft Windows 98SE, NT, 2000, XP, Vista, Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX, Linux |
| 2.4 GHz | No |
| Frequency band | 5.15 - 5.85 GHz |
| Channel bandwidth | 80 MHz |
| Transmitting power | 27 dBmW |
| Networking standards | IEEE 802.11a, IEEE 802.11ac, IEEE 802.11n |
| Ethernet LAN data rates | 10, 100, 1000 Mbit/s |
| Maximum data transfer rate | 867 Mbit/s |
| Placement | Pole |
| Certification | CE, FCC, RoHS, IC |
| Product color | White |
| LED indicators | Power |
| Housing material | Plastic |
| International Protection (IP) code | IP65 |
| Operating temperature (T-T) | -40 - 70 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Cables included | AC |
| Package type | Box |
| Output current | 0.6 A |
| Output voltage | 24 V |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| USB 2.0 ports quantity | 0 |
| Ethernet LAN (RJ-45) ports | 1 |
| Security algorithms | HTTPS, SNMP, SSH, WPA, WPA2, WPA2-AES, WPA2-PSK, WPA2-TKIP |
| Service Set Identifier (SSID) features | Multiple SSIDs, SSID broadcast, SSID broadcast on/off |
| Harmonized System (HS) code | 85176990 |
Weight and Dimensions| Depth | 280 mm |
|---|---|
| Width | 366 mm |
| Height | 207 mm |
Device connects to WISP and acts as a home router.
Device functions as a home router with extended wireless range.
Steps to access the PharOS configuration interface.
Guides through the Quick Setup wizard for network configuration.
Sets up the Wide Area Network connection type and related settings.
Configures Local Area Network settings for the device and clients.
Manages firewall, ping, and VPN settings for network protection.
Enhances security by binding MAC addresses to specific IP addresses.
Sets up fundamental wireless settings like SSID, mode, and transmit power.
Configures settings for connecting the device to an upstream wireless network.
Sets up parameters for the device when acting as an Access Point for clients.
To Next Page
