Need help?Do you have a question about the TP-Link CPE605 and is the answer not in the manual?
General| Flash memory | 8 MB |
|---|---|
| Frequency band | 5 GHz |
| Internal memory | 64 MB |
| Processor model | Atheros MIPS 74Kc |
| Built-in processor | Yes |
| Cabling technology | 10/100Base-T(X) |
| Processor frequency | 560 MHz |
| Vertical beam width | 10 ° |
| Internal memory type | DDR2 |
| Networking standards | IEEE 802.11a, IEEE 802.11n |
| Horizontal beam width | 7 ° |
| Antenna gain level (max) | 23 dBi |
| Cables included | AC |
| Quantity per pack | 1 pc(s) |
| Input voltage | 16 - 27 V |
| Power source type | PoE |
| Mounting | Pole |
| Antenna type | Directional antenna |
| Certification | CE, FCC |
| Product color | White |
| Housing material | Plastic |
| Protection features | Dust resistant, Water resistant |
| Antenna connector type | - |
| International Protection (IP) code | IP65 |
| Sustainability certificates | RoHS |
| Operating temperature (T-T) | -40 - 70 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 10 - 90 % |
| Harmonized System (HS) code | 85177100 |
Weight and Dimensions| Depth | 170 mm |
|---|---|
| Width | 233.4 mm |
| Height | 156 mm |
| Package depth | 155 mm |
| Package width | 328 mm |
| Package height | 135 mm |
| Package weight | 1420 g |
Step-by-step guide for assembling and mounting the CPE hardware components.
How to connect the CPE to the power source using the PoE adapter.
Essential procedures for protecting the device from lightning and electrostatic discharge.
Step-by-step guide to access and log into the PharOS web interface.
Important safety precautions and guidelines for using the device.
To Next Page