Need help?Do you have a question about the TP-Link CPE205 and is the answer not in the manual?
General| Wireless Standards | IEEE 802.11 b/g/n |
|---|---|
| Frequency Band | 2.4 GHz |
| Frequency | 2.4-2.4835GHz |
| Max Data Rate | 300 Mbps |
| Antenna Gain | 9 dBi |
| Ethernet Ports | 1 x 10/100 Mbps |
| Humidity | 10% to 90% non-condensing |
| Mounting Type | Pole Mounting |
| Antenna Type | Dual Polarization |
| Power Supply | PoE (Power over Ethernet) |
| Operating Temperature | -30 to 70 °C |
| Storage Temperature | -40°C~70°C (-40℉~158℉) |
| Operating Modes | Access Point, Client, Repeater |
| Wireless Security | WEP, WPA/WPA2, WPA-PSK/WPA2-PSK |
Lists all items included in the product package for installation and setup.
Details the meaning of different LED states for device status and connectivity.
Illustrates the physical ports and buttons on the CPE devices for different models.
Describes the remote reset function and power LED on the PoE adapter.
Guidance on choosing an optimal location and calculating the minimum mounting height.
Instructions on positioning CPEs for best signal reception using maps and beamwidth.
Step-by-step guide for connecting the CPE and power adapter with Ethernet cables.
Instructions on how to physically attach the CPE to a mounting surface.
Steps for securely mounting the passive PoE adapter using a bracket.
Explains two methods to ensure proper grounding for lightning and ESD protection.
Details the specifications of shielded CAT5e cables with ground wire for protection.
Guides on setting a static IP, accessing the web interface, and initial login procedures.
Steps to set up the CPE to broadcast a wireless network (SSID, security).
Steps to connect the CPE to an existing wireless network as a client.
Using beep sound and signal level indicators to align the antenna for best performance.
Lists physical and electrical specifications including dimensions, interface, and power.
Details wireless capabilities such as antenna gain, beamwidth, and supported standards.
Instructions on how to reset the CPE to its original factory configuration.
Explains the Fresnel Zone method for determining optimal CPE placement height.
Information on the proprietary MAXtream protocol and its benefits for wireless links.
How to use Spectrum Analysis to identify optimal channels with minimal radio noise.
Guidance on reading spectrum analysis graphs to select the best channels.
To Next Page
