Need help?Do you have a question about the TP-Link CPE220 and is the answer not in the manual?
General| 5 GHz | No |
|---|---|
| Bandwidth | 2.4 GHz |
| Frequency band | 2.4 - 2.483 GHz |
| Channel bandwidth | 40 MHz |
| Channels quantity | 5 channels |
| Networking standards | IEEE 802.11b, IEEE 802.11g, IEEE 802.11n |
| Maximum data transfer rate | 300 Mbit/s |
| Management platform | Pharos Control |
| Flash memory | 8 MB |
| Internal memory | 64 MB |
| Input current | 0.8 A |
| Output current | 1 A |
| Output voltage | 24 V |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| Power consumption (max) | 10.8 W |
| Security algorithms | 64-bit WEP, 128-bit WEP, 152-bit WEP, AES, HTTPS, SNMP, SSH, SSID, TKIP, WPA, WPA-PSK, WPA2, WPA2-PSK |
| Number of SSID supported | 1 |
| Service Set Identifier (SSID) features | SSID broadcast on/off |
| Placement | - |
| Certification | - CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark - RoHS, IPX5 |
| Product color | White |
| International Protection (IP) code | IPX5 |
| USB 2.0 ports quantity | 0 |
| Antenna features | Integrated antenna |
| Antennas quantity | 2 |
| Antenna gain level (max) | 12 dBi |
| Storage temperature (T-T) | -40 - 70 °C |
| Operating temperature (T-T) | -30 - 70 °C |
| Storage relative humidity (H-H) | 5 - 95 % |
| Operating relative humidity (H-H) | 10 - 90 % |
Weight and Dimensions| Depth | 57 mm |
|---|---|
| Width | 110 mm |
| Height | 33.5 mm |
Details two methods for proper grounding to prevent ESD and lightning damage.
Step-by-step guide on how to access and log into the PharOS Web Interface.
Instructions for setting up the CPE device as an Access Point.
To Next Page
