TP-Link CPE710 How To Upgrade The Firmware

How to Upgrade the Firmware of Pharos Series Product
Notice:
● After you downloaded the firmware from TP-LINK website, please use decompression software,
such as WinZIP or WinRAR to extract the firmware file to a folder;
● Do NOT turn off the power or cut down the Ethernet cable during upgrade process;
● It is recommended to upgrade the firmware via Ethernet cable connection but not wireless
connection;
● It is recommended to back up the current settings so you can restore the settings manually after
the upgrade.
● It is recommended to upgrade the firmware with Chrome and Firefox.
There are two methods to upgrade the firmware:
1) Upgrade the firmware via web management page of the PharOS devices.
2) Batch upgrade the firmware via centralized management software Pharos Control.
When you have many Pharos series devices that need to be upgraded, the Method 2 is recommended,
since it supports batch and scheduled upgrade; while if you have only one or two Pharos series
devices, you can choose method 1).
Preparation:
1. Please verify the product model and the hardware version of your device from the label on the
bottom of the device to make sure you are using the correct firmware. Wrong firmware
upgrading may damage your device and void the warranty.
If there is no hardware version indicated on the label as seen above, it means it is the first
hardware version (V1).
2. Find and download the corresponding firmware according to the model number and hardware
version from the TP-LINK official website http://www.tp-link.com/en/support.html. And then
extract the bin file.
Note: Please search the product with the model number and find the firmware on the support
page.
Method 1: Upgrade the firmware via web management page

TP-Link CPE710 Specifications

General

Flash memory	16 MB
Internal memory	128 MB
Built-in processor	Yes
Processor frequency	750 MHz
Antenna gain level (max)	23 dBi
Compatible operating systems	Microsoft Windows 98SE, NT, 2000, XP, Vista, Windows 10, Windows 8, Windows 7, MAC OS, NetWare, UNIX, Linux
2.4 GHz	No
Frequency band	5.15 - 5.85 GHz
Channel bandwidth	80 MHz
Transmitting power	27 dBmW
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11n
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Maximum data transfer rate	867 Mbit/s
Placement	Pole
Certification	CE, FCC, RoHS, IC
Product color	White
LED indicators	Power
Housing material	Plastic
International Protection (IP) code	IP65
Operating temperature (T-T)	-40 - 70 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	10 - 90 %
Cables included	AC
Package type	Box
Output current	0.6 A
Output voltage	24 V
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Security algorithms	HTTPS, SNMP, SSH, WPA, WPA2, WPA2-AES, WPA2-PSK, WPA2-TKIP
Service Set Identifier (SSID) features	Multiple SSIDs, SSID broadcast, SSID broadcast on/off
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	280 mm
Width	366 mm
Height	207 mm