Need help?Do you have a question about the TP-Link Auranet EAP110 and is the answer not in the manual?
General| Band Technology | dual |
|---|---|
| Frequency Band | 2.4 ghz |
| QoS Traffic Prioritization | yes |
| Ethernet Standard | 10/100 |
| Wireless Networking Standard | wi-fi 4 |
| Wireless Standard | n |
| 2.4 Ghz Streams | 1 |
| 5.0 Ghz Streams | 0 |
| Gigabit Ethernet Speed | no |
| Antennas | 2 |
| Firewall | other |
| Data Encryption | yes |
| Encryption Type | wep, wpa, wpa-psk, wpa2-enterprise, wpa2-psk |
| Security Features | rogue ap detection; ssid to vlan mapping; 802.1x supplicant |
| Ports | rj-45 |
| WAN Ports | 1 |
| Built In Modem | no |
| Bluetooth | no |
| System Requirements | microsoft windows 10/8/7/vista/xp |
Weight and Dimensions| Height | 1.9 inches |
|---|---|
| Width | 7.1 inches |
| Net Weight | 2 pounds |
Statement on FCC RF radiation exposure limits for uncontrolled environments and mobile configurations.
Details EU requirements on limiting public exposure to electromagnetic fields.
Specifies restrictions for certain models, such as indoor use only.
Statement on compliance with Innovation, Science and Economic Development Canada license-exempt RSSs.
Specifies that EAP245 is used as an example throughout the guide.
Provides links for software, support, and contact information.
Explains how EAPs work independently and how to access their web interface.
Describes EAPs managed by EAP Controller software and how to manage them.
Details how to revert a managed EAP back to standalone mode.
Overview of wireless configuration options including basic, SSIDs, and advanced settings.
Explains portal authentication for guest access, customization, and policies.
Describes how to control wireless access using MAC addresses.
Allows configuring rules for radios to operate at specific time intervals.
Prioritizes voice and video traffic over other traffic types.
Detects unauthorized access points on the network and manages trusted APs.
Displays status and detailed information for connected Access Points.
Monitors parameters and status of configured wireless network SSIDs.
Displays status and details of connected wireless clients.
Records hardware, software, and system issues for monitoring and troubleshooting.
Configures the EAP's built-in web server for management access.
Controls which hosts are allowed to log in to the EAP's web management interface.
Configures link aggregation for EAP330 to increase bandwidth and reliability.
Allows enabling or disabling the device's LEDs.
Enables and configures the SSH server for secure remote management.
Enhances security by restricting management access to a specific VLAN.
Configures the device as an SNMP agent for network monitoring.
Allows changing the administrator username and password for device security.
Sets the device's system time, including timezone, date, and NTP synchronization.
To Next Page