TP-Link Auranet EAP110 - Trunk (for EAP330 Only)

Following is the page of
Management Access
.
Figure 7-8 Management Access Page
MAC
Authentication:
Check the box to enable MAC Authentication. After MAC
Authentication is enabled, only the PCs in MAC address list can log in
the device’s web management page. By default this function is
disabled. All PCs in LAN can log in and manage the device.
MAC1~MAC4:
Enter the MAC addresses of the PCs which are authorized to log in the
device.
7.4 Trunk (For EAP330 only)
Following is the page of
Trunk
. By default the Trunk function is disabled.
Figure 7-9 Trunk
Enable: Check the box to enable Trunk.
53