The Trunk function can bundle multiple Ethernet links into a logical link
to increase bandwidth, improve reliability and achieve load balancing.
The EAP330 has two 1000Mbps Ethernet ports. If the Trunk function is
enabled and the ports are in the speed of 1000Mbps Full Duplex, the
whole bandwidth of the Trunk is up to 4Gbps (2000Mbps * 2) because
the bandwidth of each member port is 2000Mbps.
Mode:
Select the applied mode of Trunk Arithmetic. The device will choose
the port to transfer the packets based on the mode of Trunk
Arithmetic.
• SRC MAC + DST MAC: When this option is selected, the arithmetic
will be based on the source and destination MAC addresses of the
packets.
• DST
MAC: When this option is selected, the arithmetic will be
based on the destination MAC addresses of the packets.
• SRC MAC: When this option is selected, the arithmetic will be
based on the source MAC addresses of the packets.
7.5 LED ON/OFF
Following is the page of
. By default the LED is on.
Figure 7-10 LED ON/OFF
7.6 SSH
This device supports the SSH Server function that allows users to login and manage it
through SSH connection on the SSH client software.
SSH (Secure Shell) is a security protocol established on application and transport layers.
SSH-encrypted-connection is similar to a telnet connection, but essentially the old
telnet remote management method is not safe, because the password and data
transmitted with plain-text can be easily intercepted. SSH can provide information
security and powerful authentication when you login this device remotely through an
54
To Next Page
Loading...
