Need help?Do you have a question about the TP-Link AURANET EAP110-Outdoor and is the answer not in the manual?
General| Band Technology | dual |
|---|---|
| Frequency Band | 2.4 ghz |
| QoS Traffic Prioritization | yes |
| Ethernet Standard | 10/100 |
| Wireless Networking Standard | wi-fi 4 |
| Wireless Standard | n |
| 2.4 Ghz Streams | 1 |
| 5.0 Ghz Streams | 0 |
| Gigabit Ethernet Speed | no |
| Antennas | 2 |
| Firewall | other |
| Data Encryption | yes |
| Encryption Type | wep, wpa, wpa-psk, wpa2-enterprise, wpa2-psk |
| Security Features | rogue ap detection; ssid to vlan mapping; 802.1x supplicant |
| Ports | rj-45 |
| WAN Ports | 1 |
| Built In Modem | no |
| Bluetooth | no |
| System Requirements | microsoft windows 10/8/7/vista/xp |
Weight and Dimensions| Height | 1.9 inches |
|---|---|
| Width | 7.1 inches |
| Net Weight | 2 pounds |
Lists items included in the EAP package: unit, antennas, bracket, and accessories.
Details the layout of ports and indicators on the EAP unit.
Explains LED statuses for device initialization, operation, errors, and resets.
Describes the reset function and power indicator on the Passive PoE Adapter.
Illustrates a typical network setup with EAPs and mentions DHCP/management host requirements.
Explains two methods for grounding the EAP to protect against lightning and ESD.
Introduces pole and wall mounting options for the EAP.
Detailed steps for mounting the EAP onto a pole using a metal strap.
Detailed steps for mounting the EAP onto a wall using a bracket and screws.
Guides on connecting the Ethernet cable and affixing the waterproof rubber insert.
Explains connecting the EAP to the PoE adapter and power outlet.
Outlines installing and configuring the EAP Controller software for EAP management.
To Next Page