Figure 7-5 Enable Server
System Log Server IP: Enter the IP address of the remote server.
System Log Server
Port:
Enter the port of the remote server.
Enable Nvram
By default, Nvram is disabled. Check the box to enable Nvram, system logs will be saved
after power supply is cut.
Nvram (Non-volatile Random Access Memory) is a RAM that can still save data even if a
device is power off. All TP-Link EAPs are equipped with Nvram. With this option enabled,
the Nvram feature can help reserve the system logs when an EAP device is power off.
7.1.3 Backup Log (For EAP320/330/225 only)
You can save the current system log to a file. Following is the page of
.
Figure 7-6 Backup Log Page
7.2 Web Server
You can log in web management interface, thereby manage and maintain the device.
51
To Next Page
Loading...
